Compatibility problem with Windows 10 computers

When I plug in Nokia 8 on Windows 10, the contents of phone are not displayed at all in Windows Explorer. Only Nokia 8 device and blank directory are displayed.

Compatibility problem with Windows 10 computers

user274 user274
 /  edited October 2017
When I plug in Nokia 8 on Windows 10, the contents of phone are not displayed at all in Windows Explorer. Only Nokia 8 device and blank directory are displayed. In addition, a small partion appears as a CD/DVD drive. I have tried two different Win10 computers - the result is the same. Connecting Nokia 8 to Windows 7 PC was OK. The contents of the phone and the SD card were visible. Is compatibility problem with Windows 10 computers a wider problem?

Comments

  •  I have the same problem. Hope it will be fixed soon.

  • If you see the CD icon on your PC open it and install the driver.
  • Doesn't help. I have tried it already. The driver doesn't install successfully.
  • Johann Student Johann Student
     /  edited September 16

     I got an answer from the Nokia support team which fix the problem. Here the translation of the email from German to English: 1. Open the confi menue and push the Build number several times untill you get the info "you are already developer". 2. Then choose the developer option and select USB configuration. Probably MTP is already selected. Select now charging and than MTP again. Connect the phone via USB to your W10 Computer and it will work.

  • Yes. Now it Works... Thanks!
  • Unknown
     /  edited September 16

     I have the same problem since Android 8.0 update. The workaround works, but has to be done everytime before the phone is connected to the computer.


    PLEASE FIX THIS

    Rufer

  • user1536074058269 user1536074058269
     /  edited September 16

     Yup. This issue is rather annoying. The MTP needs to be re-activated every time.

  • Doesnt work for me on win7.

    MTP shows only disk with driver. PTP shows photos from internal memory.

  • Just bought a Nokia 1 for my kid, I have the problem on both Win 7 and Win 10.

    Incredibly annoying that the MTP activation must be done every time (even every time the phne locks, even if connected via USB to the PC). I'm pondering sending the phone back.

  • gemini75 gemini75
    ✭✭✭  / 
    Go into device manager then find the driver for your device. If your not sure unplug it from your pc or laptop then plug it back in.

    Delete the driver which is installed and unplug the device. Reboot windows then plug your device back in advertising hopefully it will work
  • Sorry GEMINI75, that doesn't work (had already tried before). The only thing that works is the trick mentioned by Johann Student (Developer mode, then MTP setting). But it's not permanent, has to be re-done every time.

Sign In or Register to comment.