Why I'm not getting any updates from past three months on the security patch level?

cheking today on 8 june 2019

Why I'm not getting any updates from past three months on the security patch level?

Avik Vish Avik Vish
✭✭  / 
cheking today on 8 june 2019
Tagged:

Best Answer

  • Argho Sarkar Argho Sarkar
    ✭✭✭✭  /  Accepted Answer
    Avik Vish said:
    https://www.nokia.com/phones/en_int/security-updates

    The above link shows which Nokia device received which update recently with date of release of the update for the device.

    According to the above, for Nokia 5.1 Plus MAY security patch update was released. It is strange that you haven't received the update.


    Ya that's correct. I also checked about that. That's why I'm asking about like is this only happening with my device only or with some other users also. And why we are facing this issue? 
    Happened with other devices as well bro. You are not alone.

    Try factory data reset or in the community people were saying that using a dead sim and checking for updates worked for them. Sounds strange but some members used this trick and it worked.

    You can also try the VPN trick---->
    https://nokiapoweruser.com/you-can-force-pie-recent-updates-on-nokia-smartphones-using-vpn-trick/

Answers

  • Gauransh Raj Gauransh Raj
    ✭✭  / 
    Yes bro I am also not getting any updates last three months..
  • Argho Sarkar Argho Sarkar
    ✭✭✭✭  / 
    https://www.nokia.com/phones/en_int/security-updates

    The above link shows which Nokia device received which update recently with date of release of the update for the device.

    According to the above, for Nokia 5.1 Plus MAY security patch update was released. It is strange that you haven't received the update.


  • Avik Vish Avik Vish
    ✭✭  / 
    https://www.nokia.com/phones/en_int/security-updates

    The above link shows which Nokia device received which update recently with date of release of the update for the device.

    According to the above, for Nokia 5.1 Plus MAY security patch update was released. It is strange that you haven't received the update.


    Ya that's correct. I also checked about that. That's why I'm asking about like is this only happening with my device only or with some other users also. And why we are facing this issue?
  • Avik Vish Avik Vish
    ✭✭  / 
    Thanks for the advice sir.Hope it will work for me.😊
  • AkashBhosale561 AkashBhosale561
    ✭✭  /  edited June 2019
    My phone  is Nokia 5.1plus and I have still February security patch and today is June 25 what the advice send me mail to [email protected]
  • stellaangali4 stellaangali4
    ✭✭  /  edited July 3
  • johnson smith johnson smith
    ✭✭  / 

    During the WPS connection process of the D-Link setup process, when a user presses the WPS button on his range extender, he has to press the WPS button of his router within one minute. Once the signal LED on your range extender stops flashing and turns solid green, it means the WPS (Wi-fi protected setup) connection process is complete. After the successful connection process, a user has to visit the dlinkap.local interface to perform the configuration process.


  • johnson smith johnson smith
    ✭✭  / 

    With the help of the Access Control feature, a user can now control the number of users who can connect to the routerlogin.net network. Access Control has provided users with the authority to jeopardize the control over the number of devices which can connect to your network. You can also check the current devices that are being allowed or blocked from connecting to the network. Access rule will only apply to the devices that will connect to your network in the future, it won’t affect the devices which were previously blocked or allowed within the network.


  • emmy freed emmy freed
     /  edited September 17

    WPS button of his router within one minute. Once the signal LED on your range extender stops flashing and turns solid green, it means the WPS (Wi-fi protected setup) connection shagle process is complete. After the successful connection process, a user has to visit the dlinkap.local interface to perform the configuration process.

Sign In or Register to comment.